[c-nsp] Open Source solution to deploy a radius server against Cisco devices?

[Alex Balashov]

FreeRADIUS has not been a problem for us.

--
Sent from mobile device

On Mar 7, 2009, at 10:09 PM, Ge Moua <moua0100 at umn.edu> wrote:

> We use Radiator over here to manage over 6,000 cisco devices; works  
> pretty good on server class hardware.
>
> Regards,
> Ge Moua | Email: moua0100 at umn.edu
>
> Network Design Engineer
> University of Minnesota | Networking & Telecommunications Services
>
>
>
> luismi wrote:
>> Hi all,
>>
>> I am looking for an open source solution to deploy some radius in our
>> network.
>> The primary goal is to connect to those radius to provide auth  
>> services:
>> - The VPN Concentrators and vpn accounts (we would move all the vpn
>> accounts info to the radius)
>> - Validate ip http auth-proxy users
>>
>> Radius service should be able to be managed using a web interface.
>> I don't really mind if there is a proper web interface of if we  
>> need to
>> install webadmin.
>> It also must support accounting.
>> And it would be great if it is possible to have the back-end into  
>> MySQL.
>>
>> I was checking FreeRadius and Radiator.
>> Any other options?
>> All comments are welcome.
>>
>> Thanks
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/