[c-nsp] Etherchannel guard vs. mstp]
Nemeth Laszlo
csirek at cooler.hu
Tue Mar 10 08:51:26 EDT 2009
Hi
I make a mistake in the Routers name.
This is the good version:
I have a 7600/RSP720-3CXL with advipservicesk9-mz.122-33.SRC3.bin
(this is Router A), 6500/SUP720-3BXL with
ipservicesk9-mz.122-18.SXF13.bin (this is Router B) and a C 6500/3BXL
with ipservicesk9-mz.122-18.SXF6.bin (Router C)
The topology is:
Router A == 4x10G (lacp) == Router B == 2x10G (pagp) == Router C
All routers run Rapid-PVSTP.
I needed to change the STP from RSTP to MSTP on all devices.
The first router was the Router A. It changed without problem.
But when i sent the "spanning-tree mode mstp" to Router B it put down
the 4x10G Etherchannel link with Router A and logged it:
Mar 9 16:04:57.669 MET: %PM-SP-STDBY-4-ERR_DISABLE: channel-misconfig
error detected on Te1/3, putting Te1/3 in err-disable state
Mar 9 16:04:57.677 MET: %PM-SP-STDBY-4-ERR_DISABLE: channel-misconfig
error detected on Te1/4, putting Te1/4 in err-disable state
Mar 9 16:04:57.685 MET: %PM-SP-STDBY-4-ERR_DISABLE: channel-misconfig
error detected on Te2/3, putting Te2/3 in err-disable state
Mar 9 16:04:57.701 MET: %PM-SP-STDBY-4-ERR_DISABLE: channel-misconfig
error detected on Te2/4, putting Te2/4 in err-disable state
Mar 9 16:04:57.641 MET: %PM-SP-4-ERR_DISABLE: channel-misconfig error
detected on Po3, putting Te1/3 in err-disable state
Mar 9 16:04:57.653 MET: %PM-SP-4-ERR_DISABLE: channel-misconfig error
detected on Po3, putting Te1/4 in err-disable state
Mar 9 16:04:57.665 MET: %PM-SP-4-ERR_DISABLE: channel-misconfig error
detected on Po3, putting Te2/3 in err-disable state
Mar 9 16:04:57.673 MET: %PM-SP-4-ERR_DISABLE: channel-misconfig error
detected on Po3, putting Te2/4 in err-disable state
Mar 9 16:04:57.685 MET: %PM-SP-4-ERR_DISABLE: channel-misconfig error
detected on Po3, putting Po3 in err-disable state
The Etherchannel with Router C stilled UP only the Router A went down.
If i deleted and recreated the port channel with LACP or PAGP or other
etherchannel number, the result always it: put down the links.
If i changed back to RSTP on the Router B, all links went UP with router
A and it's working without problem.
So the topology now is: Router A runs MSTP, router B runs RSTP and
router C runs RSTP too.
I think the STP's etherchannel guard put down the link, but i don't
found any bug that made this problem in the BugTool at Cisco.com.
Any idea?
Thanks
Laszlo
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list