[c-nsp] OSPF Default Route

[Steven.Glogger at swisscom.com]

hi manaf

one quick "hack" would be: run 2 different ospf processes and do redistribute between them. unfortunately you're then seeing all the routes as ospf external..

-steven

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Manaf Al Oqlah
Sent: Tuesday, March 10, 2009 8:42 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] OSPF Default Route

Hi,

Is there any way to advertise default route in OSPF with a specific metric to an interface and another metric to another interface. For example, I want to advertise default route (default-information originate) for neighbor connected to gigabit 1/0 with metric 10 and for neighbor connected to gigabit 1/1 with metric 20.

Thank you
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/