[c-nsp] 15km optics

Paul Stewart paul at paulstewart.org
Fri Mar 13 12:07:50 EDT 2009


Hi Ray..

Use the ZX SFP and check the levels - if needed, put attenuators inline to
drop the signal back down.... we have some runs with ZX in place at 12-15km
and no attenuation with no issues - they have been in place for several
years now...

I don't have the specs but the receiver sensitivity I believe is the key
(what highs and lows it can tolerate).... someone may have a more technical
explanation for you ;)

Take care,

Paul


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ray Burkholder
Sent: Friday, March 13, 2009 11:48 AM
To: 'cisco-nsp'
Subject: [c-nsp] 15km optics

I have a carrier which has about 13km to 15km of fibre to their CO.  They
run 1310 nm alcatel equipment on their end.  I was wanting to use a Cisco
GLC-LH-SM on my end but that is rated for 10km.  The GLC-ZX-SM is 1550 nm
70km device which is incompatible.  

Does anyone have suggestions on how to complete this link?  inexpensive
optical regenerator?  small intermediate alcaltel box?   a cisco SFP running
1310 nm and has longer range?

Ray


-- 
Scanned for viruses and dangerous content at 
http://www.oneunified.net and is believed to be clean.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/




More information about the cisco-nsp mailing list