[c-nsp] 12.2(33)SXI vpnv6

[Tim Durack]

I'm running 12.2(33)SXI on some boxes in a PE-PE setup. I'm trying to enable
vpnv6. BGP side of things is working:

rtr-1#sh ipv6 route vrf v101
IPv6 Routing Table - v101 - 4 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
       B - BGP, R - RIP, I1 - ISIS L1, I2 - ISIS L2
       IA - ISIS interarea, IS - ISIS summary, D - EIGRP, EX - EIGRP
external
       O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
       ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
B   1:0:1:1::1/128 [200/0]
     via 1:0:1970::1%Default, indirectly connected
B   1:0:1:1::2/128 [200/0]
     via 1:0:1970::2%Default, indirectly connected
LC  1:0:1970:1::3/128 [0/0]
     via Loopback101, receive
L   FF00::/8 [0/0]
     via Null0, receive

But cef/labels aren't being programmed:

rtr-1#sh mls cef ipv6 vrf v101

Codes: + - Push label
Index  Prefix                              Adjacency
196640 1:0:1970:1::3/128                receive
196672 ::/127                              drop
196704 FE80::/10                           receive
196736 FF00::/8                            glean
197152 ::/0                                drop

vpnv4 is working fine, IPv6 in the global table is working, but not vpnv6.

Any ideas?

Tim:>