[c-nsp] 12.2(33)SXI vpnv6

[Tim Durack]

On Fri, Mar 13, 2009 at 4:54 PM, Bruce Pinsky <bep at whack.org> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Tim Durack wrote:
> > I'm running 12.2(33)SXI on some boxes in a PE-PE setup. I'm trying to
> enable
> > vpnv6. BGP side of things is working:
> >
> > rtr-1#sh ipv6 route vrf v101
> > IPv6 Routing Table - v101 - 4 entries
> > Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
> >        B - BGP, R - RIP, I1 - ISIS L1, I2 - ISIS L2
> >        IA - ISIS interarea, IS - ISIS summary, D - EIGRP, EX - EIGRP
> > external
> >        O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext
> 2
> >        ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
> > B   1:0:1:1::1/128 [200/0]
> >      via 1:0:1970::1%Default, indirectly connected
> > B   1:0:1:1::2/128 [200/0]
> >      via 1:0:1970::2%Default, indirectly connected
> > LC  1:0:1970:1::3/128 [0/0]
> >      via Loopback101, receive
> > L   FF00::/8 [0/0]
> >      via Null0, receive
> >
> > But cef/labels aren't being programmed:
> >
> > rtr-1#sh mls cef ipv6 vrf v101
> >
> > Codes: + - Push label
> > Index  Prefix                              Adjacency
> > 196640 1:0:1970:1::3/128                receive
> > 196672 ::/127                              drop
> > 196704 FE80::/10                           receive
> > 196736 FF00::/8                            glean
> > 197152 ::/0                                drop
> >
> > vpnv4 is working fine, IPv6 in the global table is working, but not
> vpnv6.
> >
> > Any ideas?
> >
>
> Got a config?
>
> Assume you did enable "mls ipv6 vrf"...
>

Yup:

rtr-1#sh run | i mls ipv6 vrf
mls ipv6 vrf

(same on all PE)