[c-nsp] OSPF Areas

[Thermos Saamnet]

Hi all,

I'm having an issue setting up an OSPF border router using a VRF. Here's the
configuration:

        router ospf 20 vrf clients
         network 10.0.0.0 0.0.0.3 area 0
         network 10.0.0.4 0.0.0.1 area 1

It's pretty basic but strangely enough only routers in Area 0 see the
inter-area routes. Routers in Area 1 don't see the 10.0.0.0/30 (as
inter-area or otherwise). The adjancencies are all up and the routes are
present in the database but routers in Area 1 won't insert them into the
routing table.

Anyone encountered this type of behaviour before?

PS. We're using non-MPLS based VRFs.