[c-nsp] OSPF Areas

[Anderson Levi]

That resolved the issue. Thanks a lot.


On Tue, Mar 17, 2009 at 7:19 PM, Oliver Boehmer (oboehmer) <
oboehmer at cisco.com> wrote:

> Thermos Saamnet <> wrote on Tuesday, March 17, 2009 17:09:
>
> > Hi all,
> >
> > I'm having an issue setting up an OSPF border router using a VRF.
> > Here's the configuration:
> >
> >         router ospf 20 vrf clients
> >          network 10.0.0.0 0.0.0.3 area 0
> >          network 10.0.0.4 0.0.0.1 area 1
> >
> > It's pretty basic but strangely enough only routers in Area 0 see the
> > inter-area routes. Routers in Area 1 don't see the 10.0.0.0/30 (as
> > inter-area or otherwise). The adjancencies are all up and the routes
> > are present in the database but routers in Area 1 won't insert them
> > into the routing table.
> >
> > Anyone encountered this type of behaviour before?
> >
> > PS. We're using non-MPLS based VRFs.
>
> enable
>
> router ospf <id> vrf <foo>
>  capability vrf-lite
>
> on all VRF-lite OSPF speakers to disable the MPLS-VPN PE loop checks
> (down bit, domain-it/tag)..
>
>        oli
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>