[c-nsp] QoS Questions

[Jeff Cartier]

This question is in regards to QoS on a 3750...

 

If I'm trying to establish the PQ for Vlan2...and I have interfaces that
aren't in vlan 2, lets say they are an access-port in vlan 11...would
this interface configuration be correct or incorrect?

 

interface GigabitEthernet1/0/1

 description xxxxxxx

 switchport access vlan 11

 switchport mode access

 switchport nonegotiate

 no logging event link-status

 load-interval 30

 srr-queue bandwidth share 1 70 25 5

 srr-queue bandwidth shape  3  0  0  0

 priority-queue out

 mls qos trust cos

 spanning-tree portfast

 

Do I need to have the 'priority-queue out' command?  And do I need the
'srr-queue' commands even though traffic passing through this interface
is to one host and not needing LLQ?