[c-nsp] PPPoE related question

[Christoph Loibl]

Hi Tseveen,

Vpdn-group for pppoe is the "old" way. You are probably looking for:

bba-group pppoe <some_name||global>
  virtual-template 1
!
interface GigabitEthernet 0/0
   pppoe enable group <same_name>
!

interface Virtual-Template 1
  ...
!

Christoph


On Mar 22, 2009, at 9:06 AM, Tseveendorj wrote:

>
> Hello,
>
> I'm trying to do PPPoE on c3825 router but I faced VPDN related  
> problem. c3825-ipvoicek9-mz.124-11.T4 IOS has only 2 (PPTP, L2TP)  
> options in protocol.
>
> vpdn-group 1
> accept-dialin *
> * protocol pptp* *
> virtual-template 1
>
> I want look like follow.
>
> vpdn-group 1
> accept-dialin
> **protocol pppoe **
> virtual-template 1
>
> The IOS version is c3825-ipvoicek9-mz.124-11.T4 of c3825.
> Which IOS version supported *protocol pppoe* command ?
>
> Look forward hearing from you.
>
> Best regards,
> Tseveen.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
CHRISTOPH LOIBL ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
mailto:c at tix.at   |No trees were killed in the creation of this message.
http://www.sil.at |However, many electrons were terrible inconvenienced.
CL8-RIPE ++++++++++++++++++++++++++++++++++++ PGP-Key-ID: 0x4B2C0055 +++