[c-nsp] BGP conditional advertisemet - NON-EXIST route map'saccess-list problem

Burak Dikici bdikici at gmail.com
Sun Mar 22 10:28:04 EDT 2009


Hımm ,  i see that right now. I think , i should read the replies more
carefully !   Thank you so much.

Burak Dikici




On Sun, Mar 22, 2009 at 2:03 PM, Mateusz Blaszczyk <blahu77 at gmail.com>wrote:

> Burak,
>
>
>> *** As a result , it looks working with tracking of the subnet which is
>> between my router and ISP-1 router. But, i am sitll getting RIB-failure on
>> my router for this subnet. Does it look OK for you ?
>>
>
> that is correct behaviour.
> the  bgp route is not inserted into the rib (hence rib failure) because the
> connected route has better distance as Randy was explaining it here :
>
>   > Router#'s routing table will always install only the *connected*(d-0)
>>>>> > version of this /24 which is what you want! The eBGP version(d-20)
>>>>> will
>>>>> > exist only in the bgp table as a valid prefix you can track.
>>>>>
>>>>
>  Best Regards,
>
> -mat
>
>
> --
> pgp-key 0x1C655CAB
>
>


More information about the cisco-nsp mailing list