[c-nsp] match and remove no-export

Harold Ritter (hritter) hritter at cisco.com
Wed Mar 25 14:17:02 EDT 2009


Tim,

You should definitely be able to remove the no-export well know
community using an inbound route-map but you will not be able to do it
outbound on an eBGP session as the path will not even be considered for
advertisement in the latter case.

Regards 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tim Durack
Sent: Wednesday, March 25, 2009 1:07 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] match and remove no-export

This is probably a stupid question, but anyway:

Can I match and remove no-export from routes? I need to shuffle some
routes between global and a vrf. I have a "fake" eBGP session up, but
the routes I need to move are marked no-export.

I've tried applying a simple match/set route-map to the eBGP session,
without success. I'm going to assume no-export gets taken into account
before the routes even hit the route-map.

Any ideas?

Tim:>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list