[c-nsp] MLPPP

Rodney Dunn rodunn at cisco.com
Wed Mar 25 16:59:18 EDT 2009


The G1's with MLPPP should not be process switching the traffic.

What is the config?

The EC cards just offload the MLPPP to the new asic on the PA.

Rodney

On Wed, Mar 25, 2009 at 04:35:50PM -0400, Jason Berenson wrote:
> Greetings,
> 
> I've got a 7206VXR NPE-G1 with a bunch of DS3 cards in it (PA-MC-T3).  
> There's about 25 multilinks with an average of 2 T1s per bundle.  I see 
> a lot of process switching on the router and I have a feeling it's 
> because we don't have the PA-MC-T3-EC card so the processor has to step 
> in for the MLPPP. 
> 
> Is this the case?  If I get some PA-MC-T3-EC cards to swap in, will that 
> take a lot of load off the NPE-G1?  Any output needed, please let me know.
> 
> Thanks,
> Jason
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list