[c-nsp] QoS on Tunnel Interfaces w/ DSL

[Swati Sharma]

Hi,

This depends whether you want to do QoS based on tos bit or source /
destination ip... if it is based on tos bit, u do not need to do anything
and if it is based on S/S ip
use QoS-pre classify command..

Regards,





Message: 2
Date: Wed, 25 Mar 2009 08:11:20 -0400
From: "Jeff Cartier" <jcartier at acs.on.ca>
Subject: [c-nsp] QoS on Tunnel Interfaces w/ DSL
To: <cisco-nsp at puck.nether.net>
Message-ID: <BCD3E762F1767C42A5226BBACDE49BFBCE7ACD at loki.acs.local>
Content-Type: text/plain;       charset="us-ascii"
Greetings All,

I was wondering if anyone had any examples of how to impose QoS on a
Site that would be doing IPSec VPN tunnels to another site via a
standard DSL feed.

I'm curious to see if best-practice is to place the policy-shaping on
the interface tunnel and/or the Internet interface.

Thanks!