[c-nsp] 12.4(24)T Bug ?
Antonio Soares
amsoares at netcabo.pt
Sat Mar 28 22:10:28 EDT 2009
Just to add that i found this problem in a production network and i was able to reproduce the issue with dynamips.
In both situations, i have sequences of 19 reply failures. Weird, isnt' it ?
Regards,
Antonio Soares, CCIE #18473 (R&S)
amsoares at netcabo.pt
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Antonio Soares
Sent: sábado, 28 de Março de 2009 2:50
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 12.4(24)T Bug ?
Hello group,
I have a 7200 running 12.4(24)T ADVIPSERVICESK9-M configured for 6VPE:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
PE1#sh runn
Building configuration...
Current configuration : 2346 bytes
!
upgrade fpd auto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname PE1
!
boot-start-marker
boot-end-marker
!
vrf definition vrf1
rd 1:1
!
address-family ipv4
route-target export 1:1
route-target import 1:1
exit-address-family
!
address-family ipv6
route-target export 1:1
route-target import 1:1
exit-address-family
!
logging message-counter syslog
enable password cisco
!
no aaa new-model
ip source-route
ip cef
!
!
!
!
no ip domain lookup
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
archive
log config
hidekeys
!
!
!
!
!
!
class-map match-any PRECEDENCE-0
match precedence 0
!
!
policy-map MONITOR
class PRECEDENCE-0
!
!
!
!
!
interface Loopback0
ip address 100.100.100.1 255.255.255.255
!
interface FastEthernet0/0
vrf forwarding vrf1
ip address 10.10.10.254 255.255.255.0
duplex auto
speed auto
ipv6 address 2001:10::2/64
service-policy input MONITOR
!
interface FastEthernet0/1
ip address 13.13.13.1 255.255.255.0
duplex auto
speed auto
mpls ip
!
router ospf 1
router-id 100.100.100.1
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0
!
router bgp 1
bgp router-id 100.100.100.1
no bgp default ipv4-unicast
bgp log-neighbor-changes
neighbor 100.100.100.2 remote-as 1
neighbor 100.100.100.2 update-source Loopback0
!
address-family vpnv6
neighbor 100.100.100.2 activate
neighbor 100.100.100.2 send-community extended
exit-address-family
!
address-family vpnv4
neighbor 100.100.100.2 activate
neighbor 100.100.100.2 send-community extended
exit-address-family
!
address-family ipv4 vrf vrf1
redistribute connected
redistribute static
no synchronization
exit-address-family
!
address-family ipv6 vrf vrf1
redistribute connected
redistribute static
no synchronization
exit-address-family
!
ip forward-protocol nd
ip route vrf vrf1 1.1.1.1 255.255.255.255 10.10.10.1
no ip http server
no ip http secure-server
!
!
!
ipv6 route vrf vrf1 2001:1::/64 2001:10::1
!
!
!
!
!
!
control-plane
!
!
!
mgcp fax t38 ecm
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line aux 0
exec-timeout 0 0
privilege level 15
stopbits 1
line vty 0 4
password cisco
login
!
end
PE1#
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
And i have this connectivity problem between CE devices (CE1 is directly connected to PE1):
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CE1#ping
Protocol [ip]: ipv6
Target IPv6 address: 2001:2::1
Repeat count [5]: 1000
Datagram size [100]:
Timeout in seconds [2]:
Extended commands? [no]:
Type escape sequence to abort.
Sending 1000, 100-byte ICMP Echos to 2001:2::1, timeout is 2 seconds:
....!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!......
.............!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!...................!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...................!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...................!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...................!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.............
......!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!......
.............!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
Success rate is 76 percent (768/1000), round-trip min/avg/max = 48/134/400 ms
CE1#
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The problem does not occur when the input service-policy facing CE1 is removed:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CE1#ping
Protocol [ip]: ipv6
Target IPv6 address: 2001:2::1
Repeat count [5]: 1000
Datagram size [100]:
Timeout in seconds [2]:
Extended commands? [no]:
Type escape sequence to abort.
Sending 1000, 100-byte ICMP Echos to 2001:2::1, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (1000/1000), round-trip min/avg/max = 28/133/340 ms
CE1#
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Any ideas of what could be causing this ?
Thanks.
Regards,
Antonio Soares, CCIE #18473 (R&S)
amsoares at netcabo.pt
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list