[c-nsp] 10GE card for 7609

[Ben Steele]

Yes you can use the WS-670x in the 7600 with an RSP, I have a couple of
chassis with this at the moment, given they are the 6704(one with DFC)
10GE's but I can't see a 6708 not working either...
7600#sh mod
Mod Ports Card Type                              Model              Serial
No.
--- ----- -------------------------------------- ------------------
-----------
  1    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SERIAL
  2    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SERIAL
  3   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SERIAL
  5    2  Route Switch Processor 720 (Active)    RSP720-3CXL-GE     SERIAL

On Wed, Apr 1, 2009 at 2:54 AM, Geoffrey Pendery <geoff at pendery.net> wrote:

> The stuff we've been reading (look at "Supervisor Engines Supported"
> on the data sheets for "Cisco Catalyst 6500 Series 10 Gigabit Ethernet
> Interface Modules", or browse the line cards for the 7600, or go into
> Configurator tool) claims that the RSP 720 won't support the X6704 or
> X6708 10 Gig "LAN" cards, only the SIP/SPA/ES "WAN" type cards.
>
> I don't mean to kick off a big "6500 vs 7600" storm again, but does
> anyone know if this is incorrect?
> Can we buy a new 7609-S chassis, put a new RSP 720 in it, put 7600 IOS
> on that Sup, then plug in a WS-X6708-10G-3C and have it work?
>
>
> -Geoff
>
>
> On Mon, Mar 30, 2009 at 4:41 AM, Mark Tech <techconfig at yahoo.com> wrote:
> >
> > Hi
> > I have a prospect for a 10G upstream customer and Upstream ISP
> connections. I would need to connect these into our 7609s running RSP
> 720-3CXL's, at the moment I have found that the WS-X6704-10GE card may be
> suitable.
> >
> > My technical requirements are:
> > 10Gbps line rate
> > IPv4
> > Able to handle full Internet routing table
> > Potentially IPv6 and MPLS in the future
> >
> > With the WS-X6704-10GE, there seems to be several options that are
> available with it i.e.
> >
> > Memory Option:
> > MEM-XCEF720-256M
> > Catalyst 6500 256MB DDR, xCEF720 (67xx interface, DFC3A)
> > MEM-XCEF720-512M
> > Cat 6500 512MB DDR, xCEF720 (67xx interface, DFC3A/DFC3B)
> > MEM-XCEF720-1GB
> > Catalyst 6500 1GB DDR, xCEF720 (67xx interface, DFC3BXL)
> >
> > ====================================================
> > Distributed Forwarding Card Option
> >
> > WS-F6700-CFC
> > Catalyst 6500 Central Fwd Card for WS-X67xx modules
> > WS-F6700-DFC3B
> > Catalyst 6500 Dist Fwd Card, 256K Routes for WS-X67xx
> > WS-F6700-DFC3A
> > Catalyst 6500 Dist Fwd Card for WS-X67xx modules
> > WS-F6700-DFC3BXL
> > Catalyst 6500 Dist Fwd Card- 3BXL, for WS-X67xx
> > WS-F6700-DFC3C
> > Catalyst 6500 Dist Fwd Card for WS-X67xx modules
> > WS-F6700-DFC3CXL
> > Catalyst 6500 Dist Fwd Card- 3CXL, for WS-X67xx
> >
> > I assume that I would need MEM-XCEF720-1GB and WS-F6700-DFC3CXL?
> >
> > Regards
> >
> > Mark
> >
> >
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>