[c-nsp] How to improve C3750G switch uplink speed?

[Darren Yang]

That port is directly connect to a server.
so I choice type command "spanning portfast" on that interface and it
works well. :)

Thanks for all yours support !!~ :)


Regards,
pigsign




2009/5/12  <masood at nexlinx.net.pk>:
> You are using this port for UPLINK, and it could be a trunk port. I
> strongly suggest you should not use portfast on this port. This way you
> can avoid loops and 30 second wait will be worth it.
>
> Regards,
> Masood
> Blog: http://weblogs.com.pk/jahil/
>
>
>> Hi,
>>
>> When I plug wire into c3750g port, it would wait about "30sec" then
>> change to uplink status.
>>
>> Are there any method can cut down uplink time?
>>
>>
>> Regards,
>> Pigsign
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
>