[c-nsp] Need help in cat6k.

[Ramnath Velnarayanan]

Hey Folks,
 
This is regarding Cisco Catalyst 6500 series Switch with PISA Sup32 engine
which is running IOS version 12.2SXI.
 
In a redundancy setup of 9 slot chassis, is there any command/rommon
variable to predefine the 6th slot Supervisor to hold  the position of
"active supervsior" even after every reload.
 
( whereas in the case of the gear running in CatalystOS , the active
supervisor will be decided based on the slot position i.e., 5th slot sup
will try to become the active always)
 
Thanks in advance
R.Ramnath