[c-nsp] Need Help troubleshooting a 6513

Murphy, Jay, DOH Jay.Murphy at state.nm.us
Fri May 15 15:38:04 EDT 2009

Do outputs for the module...reseat the module, reload the microcode.  These can be used at different moments.

Jay Murphy 
IP Network Specialist
NM State Government
IT Services Division
PSB - IP Network Management Center
Santa Fé, New México 87502 
Bus. Ph.: 505.827.2851
"We move the information that moves your world." 
P Please consider the environment before printing e-mail

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Renelson Panosky
Sent: Friday, May 15, 2009 12:05 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Need Help troubleshooting a 6513

Hello list

I am configuring a 6513, I've created all my VLANs and assigned them to all
my ports however when i do sho vlan i see all my ports except the one in
slot 5 but when sho run i can see them with the correct vlan, when i do sho
mod here is what i get

Mod  Online Diag Status
---- -------------------
  1  Pass
  2  Pass
  3  Pass
  4  Pass
  5  Not Applicable
  7  Pass

is that mean the module defective? or the slot is bad ?

Any help will be appreciated

cisco-nsp mailing list  cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/

This inbound email has been scanned by the MessageLabs Email Security System.
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.

More information about the cisco-nsp mailing list