[c-nsp] SVI always up !

[Ibrahim Abo Zaid]

Thanks Peter

That seems it will work but it is applied globally for all VLAN , is there
any way to apply it per-VLAN ?


best regards
--Ibrahim

On Sat, May 16, 2009 at 2:24 PM, Peter Rathlev <peter at rathlev.dk> wrote:

>  On Sat, 2009-05-16 at 13:12 +0300, Ibrahim Abo Zaid wrote:
> > I have a strange situation and i think it is normal but i need a solution
> > for it
> >
> > I have 2 MLS and VLAN x is created on both and there is L2 etherchannel
> > between both and it allows all VLANs , when all access ports in VLAN x in
> > any MLS got down
> > SVI is always up although all access ports are down and that is normal
> due
> > to trunk ports always all VLANs .
> >
> > so is there any command to bind SVI status to access ports status only so
> > when access port got down , SVI got down also ?
>
> You can use "switchport autostate exclude" on the trunk port.
>
>
> http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_s7.html#wp1012922
>
>
> Regards,
> Peter
>
>
>