[c-nsp] ip tcp mss on sup720

[Javier Liendo]

hi ibrahim,

the issue is that on a 6500 with sup720 AFAIK there is no adjust-mss
under the interface...only global...

best regards,

javier

On Mon, May 18, 2009 at 8:17 PM, Ibrahim Abo Zaid
<ibrahim.abozaid at gmail.com> wrote:
> Hi Javier
>
> if you configure it under interface , it will affect transit traffic
>
> and i think global will affect locally orginated or terminated traffic and
> you won't need this
>
>
> best regards
> --Ibrahim
>
> On Tue, May 19, 2009 at 3:42 AM, Javier Liendo <javier at liendo.net> wrote:
>>
>> hi,
>>
>> on a cisco router if i want to adjust the tcp MSS from traffic flowing
>> *through* it, i can use the "ip tcp adjust-mss" under the *interface*
>> in question...
>>
>> in case of a 6500 with a sup720 i have the "ip tcp mss" *global*
>> configuration command...will this command modify the MSS from the
>> traffic flowing *through* it or only from traffic
>> originating/terminating on it? or both?
>>
>> any help/pointers/experiences will be greatly appreciated...
>>
>> regards,
>>
>> javier
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>