[c-nsp] ip tcp mss on sup720

[Rubens Kuhl]

And even if the command exists, there is no such feature on the PFC
AFAIK, so the 6500 would be turned into a 7200...


Rubens


On Mon, May 18, 2009 at 10:43 PM, Javier Liendo <javier at liendo.net> wrote:
> hi ibrahim,
>
> the issue is that on a 6500 with sup720 AFAIK there is no adjust-mss
> under the interface...only global...
>
> best regards,
>
> javier
>
> On Mon, May 18, 2009 at 8:17 PM, Ibrahim Abo Zaid
> <ibrahim.abozaid at gmail.com> wrote:
>> Hi Javier
>>
>> if you configure it under interface , it will affect transit traffic
>>
>> and i think global will affect locally orginated or terminated traffic and
>> you won't need this
>>
>>
>> best regards
>> --Ibrahim
>>
>> On Tue, May 19, 2009 at 3:42 AM, Javier Liendo <javier at liendo.net> wrote:
>>>
>>> hi,
>>>
>>> on a cisco router if i want to adjust the tcp MSS from traffic flowing
>>> *through* it, i can use the "ip tcp adjust-mss" under the *interface*
>>> in question...
>>>
>>> in case of a 6500 with a sup720 i have the "ip tcp mss" *global*
>>> configuration command...will this command modify the MSS from the
>>> traffic flowing *through* it or only from traffic
>>> originating/terminating on it? or both?
>>>
>>> any help/pointers/experiences will be greatly appreciated...
>>>
>>> regards,
>>>
>>> javier
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>