[c-nsp] General performance based routing question?

[Brad Hedlund]

On 5/21/09 3:05 PM, "Scott Granados" <gsgranados at comcast.net> wrote:

> Doesn't PFR require that PFR enabled routers be on both ends?

No, not at all.  PFR runs locally on the router and does not rely on any
other routers having PFR enabled (unless you have separated the MC
function).  PFR makes traffic engineering decisions based on the traffic
measurements on your routers only.  You do not need any special
configuration, coordination, or support from a 3rd party.

Hope this helps.

Cheers,

Brad Hedlund
bhedlund at cisco.com
http://www.internetworkexpert.org