[c-nsp] Please give me your opinion in those two network designs

[Renelson Panosky]

Hey Seth

you are right but the PA-T3 taht i know of only goes  in the 7200VXR, so
what's the part number of the T3 card that goes to the 6509

On Fri, May 22, 2009 at 12:37 PM, Larry Stites <ncnet at sbcglobal.net> wrote:

> Renelson,
>
> When you expand with 4 x 6509-E Northern California Networks, Inc., (NCN)
> can supply at 4 x (WS-C6509-E & FAN)@$4500/ea - Rack kit and slot covers
> included. Previously owned, Smartnet eligible, fully tested and very clean.
>
> Tough economic conditions and heightened environmental awareness are
> reinforcing an already strong case to use previously owned network gear. By
> choosing one of the larger, more experienced secondary market
> organizations,
> businesses can be confident that their gear is authentic, has been fully
> tested and refurbished, ready for redeployment, delivered on time and as
> expected. NCN in association with United Network Equipment Dealers
> Association can supply most if not all of your CISCO requirements. Such as:
>
> WS-CAC-2500W    $450.00
> WS-CAC-3000W    $750.00
> WS-CAC-4000W    $775.00
> WS-CAC-6000W    $950.00
> With power cords
>
> SUP720-3BXL available for $8k.each
> Other supervisor modules available...
>
> WS-X6724-SFP w/CFC $2950.each
> WS-X6748-GE-TX $4500.each
> More 6500 series modules available...
>
> 90 day warranty with pre and post sales tech support - no charge.
>
> Please allow us an opportunity to win your business.
>
> --
>
> Best regards,
>
>
> Larry E. Stites
> Northern California Networks, Inc.
> United Network Equip. Dealers Assoc. Inc.
> CA LIC# SR KH 100-484111
> Nevada City, CA 95959
> cell 530 320 4194
> land 530 265 2588
> ncnet at sbcglobal.net
> www.uneda.com
>
>
>
> on 5/22/09 7:43 AM, Renelson Panosky wrote:
>
> > My company is expanding one of his site :
> >
> >
> >
> > They already have a voice enable ISR 3845 router with etherswitch sevice
> > module (NME-XD-48ES-2S-P with 3x 6509-E
> >
> > WAN: T3
> >
> > The plan is for them to bring four more 6509-E
> >
> > Now here is my question:
> >
> > Should i connect all this 7x 6509-E on that router with etherswitch
> module?
> >
> > or
> >
> > Should i replace the 3845 with 6509-E with sup720, 6724-SFP, 6748-ge-tx
> as
> > my core
> > and connect all 7x fully loaded 6509-E switch on it.
> >
> > Some of my colleagues think it's not necessary to get another 6509-E with
> > sup720 on the core.
> >
> > what do you think?
>  > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>