[c-nsp] EoMPLS/Sup32/xconnect - missing something obvious

[Gert Doering]

Hi,

On Sat, May 23, 2009 at 07:54:06PM -0400, L'argent wrote:
> interface TenGigabitEthernet5/1
> mtu 1538
> ip address 10.1.1.37 255.255.255.252
> mpls traffic-eng tunnels
> mpls ldp discovery transport-address interface
> mpls bgp forwarding
> mpls label protocol ldp
> mpls ip

I'm not sure if you need *all* these MPLS commands - they might actually
interfere with the rest of your setup.

We don't use MPLS TE, just "plain" MPLS, and our interfaces just have

  interface TenG x/y
    mtu ...
    ip addr 1.2.3.4 255.255.255.0
    mpls ip

and that's it.

OTOH, we use EIGRP as IGP, and I'm not sure whether you might have to
tweak something in OSPF to get the labels.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 304 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20090524/7c9f103d/attachment.bin>