[c-nsp] RES: Interface descriptions - what do you put in?

Mon May 25 12:44:51 EDT 2009

I would avoid using special characters like \ and #.
You may face some issue with ISC and other softwares.	

-----Mensagem original-----
De: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] Em nome de Ziv Leyes
Enviada em: domingo, 24 de maio de 2009 04:48
Para: Cisco Nsp
Assunto: Re: [c-nsp] Interface descriptions - what do you put in?

I think all the others already gave a lot of examples, I can only add
one little suggestion.
Omit the "connected to" prefix for a description and save yourself some
characters for more important info.
What else can an interface be other than "connected to" something
else???? Isn't it obvious?

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Pete Templin
Sent: Thursday, May 21, 2009 6:07 PM
To: Cisco Nsp
Subject: [c-nsp] Interface descriptions - what do you put in?

List,

What do you put into your interface descriptions?  Do you document 
circuit ID, far-end equipment/port, near-end equipment/port, and/or 
anything else?

Pete
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

************************************************************************
************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals &
computer viruses.
************************************************************************
************

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/