[c-nsp] Port debugging on C2924

[Tuc at T-B-O-H]

Hi,

	If I had physical access, thats exactly what I'd do. But I don't, so
I need it to dump the packets into syslog for me. I don't have "debug
packet" available on the IOS on the unit, nor does "debug interface" seem
to be generating anything....

		Thanks, Tuc

> 
> int fa0/1
> 	port monitor fa0/22
> 
> ?
> 
> On Mon, May 25, 2009, Tuc at T-B-O-H wrote:
> > Hi,
> > 
> > 	Has anyone done a port debug on a C2924:
> > 
> > IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5)WC10, RELEASE SOFTWARE (fc1)
> > 
> > 	I just need to see all the traffic on a specific port (Its really
> > low volume, so not a big deal).
> > 
> > 	Normally a port mirror would do wonders, but I'm 900 miles away from
> > it and so thats not an option (If I was near it, I wouldn't need to debug
> > the device thats acting weird. :) ). I tried "debug packet int fa0/22", but
> > "packet" isn't an option in that version.
> > 
> > 	Any thoughts?
> > 
> > 		Thanks, Tuc
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> -- 
> - Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -
> - $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
>