[c-nsp] Port debugging on C2924

[Brian Raaen]

Have you tried setting up rspan
http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_19_ea1/configuration/guide/swspan.html

-- 
-----------------
Brian Raaen
Network Engineer
email: /braaen at zcorum.com/ <mailto:braaen at zcorum.com>


Tuc at T-B-O-H wrote:
> Hi,
>
> 	Has anyone done a port debug on a C2924:
>
> IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5)WC10, RELEASE SOFTWARE (fc1)
>
> 	I just need to see all the traffic on a specific port (Its really
> low volume, so not a big deal).
>
> 	Normally a port mirror would do wonders, but I'm 900 miles away from
> it and so thats not an option (If I was near it, I wouldn't need to debug
> the device thats acting weird. :) ). I tried "debug packet int fa0/22", but
> "packet" isn't an option in that version.
>
> 	Any thoughts?
>
> 		Thanks, Tuc
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>