[c-nsp] ME Route issue

[Mohammad Khalil]

hi all 

i have 2 switches 
ME-C3750-24TE with IOS c3750me-i5-mz.122-35.SE5.bin
i defined an interface VLAN (management) 
int vlan 1
ip add 10.0.0.2 255.255.255.224

and defined a default route
ip route 0.0.0.0 0.0.0.0 10.0.0.1

when i issue the command show ip route 0.0.0.0
router#sh ip route 0.0.0.0
Default gateway is not set

Host               Gateway           Last Use    Total Uses  Interface
ICMP redirect cache is empty

i have another device cisco ME-C6524GT-8S  with IOS s6523-advipservicesk9-mz.122-18.ZU2.bin

its configured the same way 
but when issuing the show ip route or show ip route 0.0.0.0

router#sh ip route 
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is 10.0.0.1 to network 0.0.0.0

     10.0.0.0/27 is subnetted, 1 subnets
C       10.0.0.96 is directly connected, Vlan1
S*   0.0.0.0/0 [1/0] via 10.0.0.3

is that normal ??


Thanks in advance


 		 	   		  
_________________________________________________________________
Keep your friends updated—even when you’re not signed in.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_5:092010