[c-nsp] WiMAX CPE Traffic

[Rubens Kuhl]

If you are talking about BreezeMAX 802.16d CPEs, the BreezeMAX 802.16d
BST have specific OIDs for graphing the per-CPE or per-service flow
traffic.

If your customers have one VLAN each, you can graph on the Cisco
device using the VLAN or Interface VLAN counters. If all customers
share a single VLAN, you will probably have to look at another way to
measure their traffic (like RADIUS Stop and interim records).


Rubens


2009/11/2 Mohammad Khalil <eng_mssk at hotmail.com>:
>
> our WiMAX CPEs are not SNMP enabled
> is there anyway that we can graph or know the traffic of each customer??
>
> Thanks in advance