[c-nsp] Experiences with l2tpv3/xconnect?

[Rens]

I have already done up to 400 Mbps with 2811 or 2821 (don't remember)
You just have to make sure your MTU is high enough depending on the frame
sizes you want to tunnel.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Adrian Chadd
Sent: jeudi 5 novembre 2009 7:22
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Experiences with l2tpv3/xconnect?

G'day,

I've been asked by a customer to solve an L2 ethernet problem
and I'm investigating simply tunneling the required VLANs over
L2TPv3/xconnect.

Does anyone have any rough throughput (PPS in particular) info
they'd like to share ? And any other deployment info - actually,
in particular I'd like to know about fragmentation related issues.

I'm looking at the Cisco 28xx series (potentially the Cisco 2811)
but I'm concerned about hitting throughput ceilings.

Thanks,


Adrian

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/