[c-nsp] IS-IS Multiarea on 12.2 SR

[Mark Tinka]

On Saturday 07 November 2009 04:08:00 am Justin Shore wrote:

> I was going to through up a red flag about trying to run
> IS-IS on a 3750 because the last time I looked
> fixed-config non-ME Cat switches didn't support IS-IS. 
> However I checked the FN just to be sure since it's been
> a long while since I looked and sure enough they added
> IS-IS to the 3750s with 12.2(50)SE.

We have IS-IS running on 3560G's and 3750's for L1-only, IOS 
12.2(52)SE. All our Ethernet switches run pure Layer 2 
switching, so we're only using IS-IS to provide access to 
the device's Loopback address, for management.

It works.

Cheers,

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20091108/d3f9d006/attachment.bin>