[c-nsp] router boots into ROMMON

[Peter Rathlev]

On Fri, 2009-11-13 at 07:56 +0100, selamat pagi wrote:
> My 7600 boots ignores the boot statement  and goes into ROMMON.
> >From ROMMON I can boot with following command:
> 
> rommon 2 >* boot bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin*
> 
> rommon 1 > set
> PS1=rommon ! >
> LOG_PREFIX_VERSION=1
> CONFIG_FILE=
> SWITCH_NUMBER=0
> SLOTCACHE=cards;
> CRASHINFO=crashinfo_FAILED
> CV=
> BOOT=bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin,1;
> 
> **
> config:
> boot-start-marker
> boot system flash sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin
> boot-end-marker
> 
> 7600#*sh boot*
> BOOT variable = sup-bootdisk:c7600s72033-ipservices-mz.122-33.SRD.bin,1;
> CONFIG_FILE variable =
> BOOTLDR variable =
> Configuration register is 0x2102
> 
> Any ideas what could be wrong ?

Try "remote command switch show boot" to see if the sup also has correct
boot information.

Resetting the boot variable and issuing "copy running-config
startup-config" should correct any differences between the two.

-- 
Peter