[c-nsp] FABRIC-3-ERR_HANDLE

[Antonio Soares]

Hello group,

I have a 12k reporting this:

%FABRIC-3-ERR_HANDLE: Reconfigure LC on fabric due to CRC error from slot 6

In one week, i have 4 of these messages.

Slot 6 is a SIP-601 containing 2 x SPA-10G.

What could be the problem ?

The "show controllers fia" do not show any problem.

The "execute-on slot 6 show controllers fia" show this:

Switch cards present: 0x1F
Switch cards monitored: 0x1F
          0          1          2          3          4
       --------   --------   --------   --------   --------
los    0          0          0          0          0          
state  Off        Off        Off        Off        Off       
crc16  53989      0          0          0          0          
xor error0          0          0          0          
cell drops1020       1020       1020       1020       


IOS=c12kprp-p-mz.120-32.SY6.bin


Thanks.

Regards,
 
Antonio Soares, CCIE #18473 (R&S)
amsoares at netcabo.pt