[c-nsp] SXI(3) code status?

[Jared Mauch]

SXI3 has a number of bug fixes for our network, including one that would cause the next-hop to be populated as 'drop' in hardware.

I strongly recommend using it over prior versions of SXI.

Due to the removal of hardware support we replaced the older 63xx/62xx series cards.

- Jared

On Nov 17, 2009, at 10:22 AM, Rubens Kuhl wrote:

> SXI2a running fine with MPLS, QoS, SVIs (no BFD on those... :-(),
> OSPF, BGP. PFC3C-only, no WAN cards/modules, no DFC.
> 
> 
> Rubens
> 
> 
> 
> On Tue, Nov 17, 2009 at 12:51 PM, Jeff Fitzwater <jfitz at princeton.edu> wrote:
>> I have been running the SXI(3) on a test router with 100M MM 6324, which it did not recognize in previous versions, and so far no complaints but then again it's not in a real world yet.
>> 
>> 
>> Does anyone else have  GOOD or BAD new on SXI(3)?
>> 
>> 
>> Jeff Fitzwater
>> OIT Network Systems
>> Princeton University
>> 
>> 
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/