[c-nsp] Graph packet loss , delay , BER

[Ge Moua]

smokeping

Regards,
Ge Moua | Email: moua0100 at umn.edu

Network Design Engineer
University of Minnesota | Networking & Telecommunications Services



Oliver Boehmer (oboehmer) wrote:
> Mohammad Khalil <> wrote on Thursday, October 01, 2009 09:26:
>
>   
>> hey all
>>
>> i want to be able to graph the packet loss between 2 routers or even
>> between a router and a remote site as well as BER or delay , can i do
>> that ? 
>> what is the best method to calculate this  ?
>>     
>
> I would set up an IP-SLA probe on the router(s) to measure the
> latency/etc., and I would expect there are mrtg/cacti scripts around
> which are able to graph this data (using SNMP)...
> check out www.cisco.com/go/ipsla for more info on ip-sla..
>
> 	oli
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>