[c-nsp] which version of asdm to use with the asa 5520??

[Ryan West]

Hey Scott,

Under the 7.2 line, I would use the latest interim release of the 5.2.4 ASDM.  In this case it would be interim release 56 -> http://www.cisco.com/cgi-bin/Software/Tablebuild/doftp.pl?ftpfile=cisco/crypto/3DES/ciscosecure/asa/interim/asdm-52456.bin&app=Tablebuild&status=showC2A

-ryan

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Scott Granados
Sent: Friday, October 02, 2009 4:32 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] which version of asdm to use with the asa 5520??

Hi all,
I'm in the process of updating a pair of ASA 5520S from 7.0.7 to 7.2.4-33. 
I have the intermediate 7.1x release that I'll switch to in the middle but 
not sure what to do with the asdm code.  What version should I use?  It 
wasn't obvious to me on the Cisco site, how do I tell which version goes 
with a specific firmware release?  Any pointers would be appreciated.

Thank you
Scott



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/