[c-nsp] GSR CPU Process is very HIGH 95%

Oliver Boehmer (oboehmer) oboehmer at cisco.com
Wed Oct 7 09:22:07 EDT 2009


bharath kondi <mailto:bluffmaster4hearts at gmail.com> wrote on Wednesday,
October 07, 2009 15:10:
> 	are you switching traffic across the PRP/GRP's Management
Ethernet
> 	ports? Those must only be used for management, i.e. traffic
from/to
> 	the GSR ..
> 
> Dear Oliver,
> 
> No.

hmm, your high interrupt load (the 71 in "CPU utilization for five
seconds: 95%/71%") suggests that the RP's CPU switches traffic, which
should not happen on a GSR as all traffic is switched by hardware.. 
It requires a closer look at the config and linecards to see what could
cause this. I'd contact TAC..

	oli


More information about the cisco-nsp mailing list