[c-nsp] Unable To Use T3 Card (PA-MC-2T3-EC)

[Dominic]

I am currently running (C7200P-SPSERVICESK9-M), Version 12.4(4)XD10


Dominic

----- Original Message ----- 
From: "Byrd, William" <will at thoughtcrime.net>
To: "Dominic" <dominic at broadconnect.ca>
Sent: Wednesday, October 07, 2009 3:26 PM
Subject: Re: [c-nsp] Unable To Use T3 Card (PA-MC-2T3-EC)


> What IOS version are you using? There is a minimum supported IOS for this
> card.
>
> -Will
>
> ----- Original Message -----
> From: "Dominic" <dominic at broadconnect.ca>
> Sent: Wed, October 7, 2009 14:21
> Subject:[c-nsp] Unable To Use T3 Card (PA-MC-2T3-EC)
>
>
> Hi Everyone:
>
> I am trying to install a Cisco T3 Card, Model #: PA-MC-2T3-EC, on a Cisco
> 7206VXR with NPE-G2.  When I insert the card, I get the alarm below.
>
> Oct  7 18:11:45.100: %ENTITY_ALARM-6-INFO: CLEAR CRITICAL PA Slot 2 Active
> Card Removed OIR Alarm
> Oct  7 18:11:50.220: %PA-3-REVNOTSUPPORTED: PA in slot2 (Ethernet) 
> requires
> base h/w revision of (1.14) for this chassis
> Oct  7 18:11:50.220: %PA-3-DEACTIVATED: port adapter in bay [2] powered 
> off.
>
>
> The google info suggests this might be an earlier version of the card, 
> which
> is why I tried a recently manufactured replacement, but with the same
> result. Does anyone know what's going on, or how to fix this?
>
>
> Thank you in advance.
> Dominic
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> ----- End of original message -----
>
>
>