[c-nsp] Unable To Use T3 Card (PA-MC-2T3-EC)

[Justin Shore]

Gert Doering wrote:
>> I am currently running (C7200P-SPSERVICESK9-M), Version 12.4(4)XD10
> 
> ... it might be that this software just doesn't know about this specific
> PA (which is very new, and anything based on 12.4(4) is a few years old
> now regarding hardware support).
> 
> "C7200P" smells like NPE-G2, so you don't have that many options - I'm
> no NPE-G2 expert, but I think all you *can* use is "12.4T" or "12.2SR" -
> so I'd pick a recent one of either IOS versions and try that.  Or go for
> 15.0(1)M, which might or might not be less bugged than 12.4(max)T.

I agree.  Dominic is running a code train that was put out just for the 
initial release of the NPE-G2.  He's running a code train that's slated 
for death essentially and should move into a regular train such as 12.4 
mainline, 12.4T or 12.2SR since G2 support has been rolled into them.

I haven't yet loaded 15.0 on a G2 but I am running on one on 24T1 and 
that box has a PA-MC-2T3-EC in it.  It of course has the NTP bug (and 
several others) that require 24T2 or 15.0 to fix.  12.4T has been fairly 
stable for me though.

Justin