[c-nsp] 7206VXR NPE for ~1000 RBE interfaces

[Frank Bulk - iName.com]

An NPE400 should do fine if you're looking used or on a tight budget, but if
you're looking to buy for growth, just get a G2 and be done with it.

Frank

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Antonio Querubin
Sent: Sunday, October 11, 2009 5:27 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 7206VXR NPE for ~1000 RBE interfaces

I'm researching upgrading a 7206VXR to handle about 1000 RBE interfaces 
off of either 2 T3 or 1 OC3 ATM line.  Anybody got any recommendations on 
which NPE would handle this scenario?

Antonio Querubin
808-545-5282 x3003
e-mail/xmpp:  tony at lava.net
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/