[c-nsp] MPLS exp imposition on 7600

[John Wilkes]

Hi.

I seem to be going mad. This is supposed to work, right? I'm trying to
get a policy-map to mark EXP5 for all traffic coming from a vlan.

mls qos
policy-map TEST
 class class-default
   set mpls exp impo 5
int vlan123
 descr to-CE
 service-policy input TEST

The counters aren't increasing:
PE#show policy-map interface

Vlan123

 Service-policy input: TEST

   class-map: class-default (match-any)
     Match: any
     set mpls experimental 5:
     Earl in slot 5 :
       0 bytes
       30 second offered rate 0 bps
       aggregate-forwarded 0 bytes


And a traceroute from the CE through PE shows that EXP is 0 for every
hop. And yes, this is where the traffic goes.

Setting the policy-map in the outgoing direction does increase the
counters, but that doesn't help much.

I also tried a policer with conform-action set mpls exp transmit, same results.

No trust (cos or dscp) configured anywhere. "mls qos mpls trust
experimental" is on by default and not disabled.

What could be wrong?

Sup: RSP720-3CXL
CE attached to: WS-X6748-GE-TX
IOS: 12.2(33)SRB1