[c-nsp] Problem after upgrading ios on the 6509-E

[Renelson Panosky]

A lot of my WS-X6148A-GE-45AF showing up with minor error after i upgrade
the IOS on my switch, does any body here have any idea why and how to fix
it?

I've tried the following but still showing up with errors

1) i reset the module
2) i reseat the module ( take it out and put it back in)
Take a look at the sho mod

#sho mod
Mod Ports Card Type                              Model              Serial
No.
--- ----- -------------------------------------- ------------------
-----------
  1   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
SAD093908LP
  2   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
SAD093909ST
  3   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
SAD0938074N
  4   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
SAL1007DK13
  5    9  Supervisor Engine 32 8GE (Active)      WS-SUP32-GE-3B
SAD0939053K
  6   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
SAD093807LW

Mod MAC addresses                       Hw    Fw           Sw
Status
--- ---------------------------------- ------ ------------ ------------
-------
  1  0015.c649.d1e0 to 0015.c649.d20f   1.3   8.4(1)       8.5(0.46)RFW Ok
  2  0015.c699.0790 to 0015.c699.07bf   1.3   8.4(1)       8.5(0.46)RFW Ok
  3  0015.63db.d030 to 0015.63db.d05f   1.2   8.4(1)       8.5(0.46)RFW Ok
  4  0016.c8ca.c350 to 0016.c8ca.c37f   2.0   8.4(1)       8.5(0.46)RFW Ok
  5  0013.809d.e5ce to 0013.809d.e5d9   4.2   12.2(18r)SX2 12.2(18)SXF1 Ok
  6  0015.63db.a090 to 0015.63db.a0bf   1.2   8.4(1)       8.5(0.46)RFW Ok

Mod  Sub-Module                  Model              Serial       Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
  1  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD093908VM  1.2    Ok
  2  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD093908WP  1.2    Ok
  3  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD093806F7  1.2    Ok
  4  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1007DAQZ  2.0    Ok
  5  Policy Feature Card 3       WS-F6K-PFC3B       SAD093906E5  2.1    Ok
  5  Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A      SAD09390847  3.0    Ok
  6  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD093806HK  1.2    Ok

Mod  Online Diag Status
---- -------------------
  1  Pass
  2  Pass
  3  Pass
  4  Pass
  5  Minor Error
  6  Pass
VACO_24_5C#

On Thu, Oct 22, 2009 at 12:46 PM, Peter Kranz <pkranz at unwiredltd.com> wrote:

> Hi Renelson,
>        Without telling us the errors, not sure how we can diagnose your
> issue.
>
> Peter Kranz
> Founder/CEO - Unwired Ltd
> www.UnwiredLtd.com <http://www.unwiredltd.com/>
> Desk: 510-868-1614 x100
> Mobile: 510-207-0000
> pkranz at unwiredltd.com
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Renelson Panosky
> Sent: Thursday, October 22, 2009 8:07 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Problem after upgrading ios on the 6509-E
>
> A lot of my WS-X6148A-GE-45AF showing up with minor error after i upgrade
> the IOS on my switch, does any body here have any idea why and how to fix
> it?
>
> I've tried the following but still showing up with errors
>
> 1) i reset the module
> 2) i reseat the module ( take it out and put it back in)
>
> Renelson
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>