[c-nsp] ME 6514 and VPLS

[Rubens Kuhl]

ME6524 is able to do point-to-point Ethernet L2 circuits (EoMPLS), not
point-to-multipoint (VPLS). ME6524 can be part of a H-VPLS hierarchy
as a leaf, not as a node, which is very similar to do point-to-point
because the multipoint decisions are made on th node.


Rubens




On Tue, Sep 1, 2009 at 6:38 AM, Alain RICHARD<alain.richard at equation.fr> wrote:
> Is it extremly difficult to find information about VLPS support on cisco
> products. I would like to build some VPLS configuration and I would like to
> know what kind of VPLS configuration the ME 6524 is able to support.
>
> The product brochure indicates "Support H-VPLS architecture, with L2 access
> and MPLS access network".
>
> do the ME 6524 support the following commands (they are show as beeing ?
>
> l2 vfi name manual
>
> interface xxx
>        xconnect vfi name
>
> if not, what kind of VPLS configuration is it able to support ?
>
> Regards,
>
> --
> Alain RICHARD
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>