[c-nsp] mpls ldp sync

Shankar Vemulapalli (svemulap) svemulap at cisco.com
Thu Sep 3 14:10:11 EDT 2009


Daniels - 

Did you configure on the Juniper side too ?? [mpls ldp sync] 
Are you running OSPF as IGP and which release on GSR ? 

Try changing the holddown timer to see if it makes a change. 
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsldpsyn.html#wp
1100282

/Shankar

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of jack daniels
Sent: Thursday, September 03, 2009 10:28 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] mpls ldp sync

I'm in middle of a issue , request your help in this

issue -

We have a GSR 12416 connected to JUNIPER router.
We are running OSPF between them.
OSPF neighbourship comes up :) ....
BUT now when I enable under ospf "mpls ldp sync" --- ospf neighbourship
goes
down and doesn't comes up. Request your help in this.

Regards
J.Daniels
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list