[c-nsp] boot variable issue

[BH]

Not sure if I understood your question, but it seems the only thing you need
to do is:
conf t
  boot system flash bootflash:cat4000-i5s-mz.122-25.EWA11.bin
  end
wr

sh bootvar

You need to include the "bootflash:" part...


On Sat, Sep 5, 2009 at 13:27, jack daniels <jckdaniels12 at gmail.com> wrote:

> Hi All,
>
> I have a querry for issue I'm facing---
>
> If I put boot sequence -
>
> sh bootvar
> BOOT variable = cat4000-i5s-mz.122-25.EWA11.bin,1;
> CONFIG_FILE variable does not exist
> BOOTLDR variable does not exist
> Configuration register is 0x2102
>
>
>
>
> sh bootflash
> -#- ED ----type---- --crc--- -seek-- nlen -length-
> ---------date/time--------- name
> 1   .. image        165C41B7  C74594   30 12535060 Jun 14 2007 01:25:48
> +05:30 cat4000-i9s-mz.122-25.EWA8.bin
> 2   .. image        B9D0BD21 1848198   31 12401540 Nov 5 2007 11:13:00
> +05:30 cat4000-i5s-mz.122-25.EWA11.bin
> 3   .D config       79E21BAD 1850F08    6    36078 Jun 26 2009 10:15:19
> +05:30 backup
> 4   .. config       D3AEB40F 1859CD0    6    36165 Sep 5 2009 15:32:50
> +05:30 backup
>
>
> and the valid file is in BOOTFLASH , will switch look for file in bootflash
> (BY DEFAULT - switch behaviour) when it doesnt finds file in FLASH.
>
> Please send supporting doc if any.
>
> Thanks and Regards
> J.Daniels
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
BH