[c-nsp] small cisco as ethernet bridge, IPv6 broken, sadness
Joe Abley
jabley at hopcount.ca
Wed Sep 9 11:50:07 EDT 2009
On 2009-09-08, at 18:47, Michael K. Smith - Adhost wrote:
> I don't think the bridge is really transparent due to the 'bridge 1
> route ip' on your exchange-point side device. If possible, you might
> want to try removing that statement (if you're local to the device, of
> course) to see if that does it. I don't think there is a 'bridge 1
> route ipv6'.
I did try removing that, and managing that bridge through the console,
but I still couldn't pass IPv6 frames.
More information about the cisco-nsp
mailing list