[c-nsp] debug bgp updates within VRF
Tony
td_miles at yahoo.com
Tue Sep 15 21:39:39 EDT 2009
Hi Biddu,
If you wish to see route table updates, then you can use "debug ip routing vrf <name>". This will show you the updates as they are applied to the VRF routing table.
If you wish to see what BGP specifically is doing then something like "deb ip bgp vpnv4 unicast updates" should help you out. You will see routes like "100:1:10.200.0.189/32" which is 10.200.0.189 for VRF with RD 100:1.
Hope this helps.
regards,
Tony.
--- On Tue, 15/9/09, Ved Labs <vedlabs at gmail.com> wrote:
> From: Ved Labs <vedlabs at gmail.com>
> Subject: [c-nsp] debug bgp updates within VRF
> To: cisco-nsp at puck.nether.net
> Received: Tuesday, 15 September, 2009, 10:31 PM
> How do i *debug bgp updates within
> VRF*
> **
> *Thanks,*
> *Biddu.*
__________________________________________________________________________________
Get more done like never before with Yahoo!7 Mail.
Learn more: http://au.overview.mail.yahoo.com/
More information about the cisco-nsp
mailing list