[c-nsp] Need help troubleshooting CRC errors

[Antonio Soares]

Try this document:

CRC Troubleshooting Guide for ATM Interfaces

http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93ef.shtml 


Regards,

Antonio Soares, CCIE #18473 (R&S)
amsoares at netcabo.pt

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Steven Pfister
Sent: quinta-feira, 17 de Setembro de 2009 15:39
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Need help troubleshooting CRC errors

Some of our older remote sites are connected via ATM. Two or three T1s come into an Cisco 8510, and from there a 155mbps OC3
connection over fiber to a 3640 router. Lately, I've been noticing that pretty much every one of them is showing what I think is a
rather high receive error count on the 3640 end of the OC3 connection, and it all seems to be CRC errors. Not much of any errors are
showing up on the 8510 end of the OC3 connection. For example, one site yesterday late afternoon showed 63, 763 receive errors for
the day. Several others were in the 20Ks. I'm not really certain what the cause might be, or where to start. Can anyone help?

Thanks!


Steve Pfister
Technical Coordinator,
The Office of Information Technology
Dayton Public Schools
115 S. Ludlow St. 
Dayton, OH 45402
 
Office (937) 542-3149
Cell (937) 673-6779
Direct Connect: 137*131747*8
Email spfister at dps.k12.oh.us


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/