[c-nsp] match-in-vrf with NVI

[Arie Vayner (avayner)]

Derick,

>From what I can see, since 12.2(33)XND you can configure duplicate outside NAT mapping with different VRFs without the need for the "match-in-vrf" keyword. It would just use the VRF names in the NAT statements:

So this config should work:

router(config)#ip nat outside source static network 172.1.1.0 16.1.1.0 /24 vrf Cust_A 
router(config)#ip nat outside source static network 172.1.1.0 16.1.1.0 /24 vrf Cust_B


Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Derick Winkworth
Sent: Thursday, April 01, 2010 22:33
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] match-in-vrf with NVI

All:

Anyone know when the "match-in-vrf" keyword will be supported with NAT NVI?  I really would like to see this!

Derick
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/